Fandom

Sly Cooper Wiki

Boardroom Brawl

1,279pages on
this wiki
Add New Page
Talk0 Share
JobWalkthrough
Let's get down to brass tacks. I need to hack both the vault room computers to get control of the electronic winch above the ballroom.
— Bentley explains to Sly and Murray how he's going to take control of the ballroom winch[src]

"Boardroom Brawl" was a job for Sly Cooper and Murray in A Starry Eyed Encounter of Sly 2: Band of Thieves.

Synopsis

Sly crawls into the boardroom through a drain pipe and immediately pulls out his Binocucom. Bentley tells him that since Murray is too large to fit through the drain pipe, Sly will need to open the vault room from the inside and that the password is written under one of the tables so the guards don't forget it. Sly proceeds to crawl under all four of the tables, both looking for the code and using the tables to hide from the roaming flashlight guards.

Once he finds the code, "46583271," he crawls out from under the last table, then enters it into the laser door keypad. The lasers shut off and Sly makes his way through the vault, pulling the security lockdown switch that sits next to a vault. This unlatches a door upstairs, letting in both Bentley and Murray. Sly jumps up to join them. Bentley says that he needs to hack both of the security terminals in order to get control of the electronic winch above the ballroom and that he needs Sly and Murray to protect him from the guards that are sure to come.

Bentley begins to hack through the level six barrier and is immediately onset by guards. Sly and Murray defend him as he goes back and forth between the two terminals, eventually hacking through all six barriers and gaining control of the winch. Bentley says to Murray that they need to hook up the direct feed and get out while the coast is clear. Mission complete.

Trivia

Ad blocker interference detected!


Wikia is a free-to-use site that makes money from advertising. We have a modified experience for viewers using ad blockers

Wikia is not accessible if you’ve made further modifications. Remove the custom ad blocker rule(s) and the page will load as expected.